Current Transformer Measurement Transformer Measuring Transformer 10kV LZZBJ9-10

Current Transformer Measurement Transformer Measuring Transformer 10kV LZZBJ9-10

Voltage Transformer Measurement Transformer Measuring Transformer 10kV JDZ(J)-3、6、10

Voltage Transformer Measurement Transformer Measuring Transformer 10kV JDZ10-3、6、10(Q)

Inflatable Cabinet Transformer Potential Transformer Voltage Transformer JDZ(X)12A-10R

JDZ(X)12A-10R is a high-performance voltage transformer for 10kV distribution systems with stringent requirements for insulation monitoring and anti-interference, and its capacitance tube design significantly improves equipment reliability. Rated primary voltage 10kV Rated secondary voltage 100V (or 100/√3V) Accuracy class 0.2/0.5 (measurement), 3P/6P (protection) Rated load 50VA (customizable on request) Insulation level 12/42/75kV (I.F./Lightning Surge/Truncation) Ambient Temperature -25℃ ~ 40℃

Inflatable Cabinet Transformer Potential Transformer Voltage Transformer JSZV12-10R

- Three-phase integrated type (S): - Saves installation space, suitable for compact switchgear (such as KYN28A-12). - With residual voltage winding (V): - Can output zero-sequence voltage (3U₀), used for insulation monitoring and grounding protection in systems with ungrounded neutral points. - Rated voltage: 10kV (primary side) / 100V or 100/√3V (secondary side). - High precision: - Measurement accuracy: Class 0.2, Class 0.5 (energy metering). - Protection accuracy: Class 3P, Class 6P (relay protection). - Low loss: small no-load current, low temperature rise, and good long-term operational stability.

Three-phase Five-column Voltage Transformer Inflatable Cabinet Transformer 10kV JSZXF-10R

The JSZXF-10R achieves a triple upgrade through material innovation (composite insulation), structural innovation (anti-pollution flashover umbrella skirt), and functional innovation (harmonic suppression digitalization), becoming the preferred solution for 10kV systems to handle complex operating conditions, with a full lifecycle cost reduction of over 30%.

LMZC-10 High Accuracy (0.2) Current Transformer with 5P10 Protection

Busbar construction Directly socketed to the busbar for easy installation and space saving. Fully enclosed casting Epoxy resin vacuum casting, moisture-proof and explosion-proof, suitable for humid and dirty environment. Modular design Removable terminals for easy maintenance Rated current ratio: common such as 100/5A, 200/5A (can be customized) - Accuracy rating: - Measurement: Class 0.2, Class 0.5 - Protection: 5P10, 10P10 - Thermal stabilization current: up to 50kA/1s - Dynamic stabilizing current: 125kA (peak) IEC 60044-1 current transformer； ANSI/IEEE C57.13 compliant CT Technical characteristics：Low power burden current transformer；Bar-type/Wound-type current transformer

Oil Power Transformer Step-up/Step-down Transformer

S11-M-30-2500/10(20)kV type fully sealed oil-immersed transformer is suitable for AC 50Hz, rated working voltage 10kV, 20kV and below power system, as a distribution transformer for petroleum, metallurgy, chemical, textile, light industry and other enterprises and dusty places.

35kV Double Winding OLTC Oil-immersed Power Transformers

800~31500/35 type oil-immersed transformer is suitable for AC 50Hz, rated working voltage 35kV power system, as a small and medium-sized substation substation substation equipment.

10kV Cast Resin Dry Transformer, Foil Wound

​This product has a wide range of applications, especially suitable for use in places with high fire protection requirements, such as mines, oil fields, subways, power plants, schools, hospitals, commercial centers, high-rise buildings and all indoor configuration systems.

Resin-Encapsulated (Cast Resin) Transformer

​This product has a wide range of applications, especially suitable for use in places with high fire protection requirements, such as mines, oil fields, subways, power plants, schools, hospitals, commercial centers, high-rise buildings and all indoor configuration systems.

CNH-12/630-20 Environment-friendly Gas Insulated Ring Switchgear

CNH-12/630-20 environmentally friendly gas closed ring network switchgear is a new type of green and environmentally friendly metal enclosed switchgear. It is insulated with environmentally friendly gases such as dry air or nitrogen, with no/less greenhouse gas emissions. The material recyclability rate after the product life cycle reaches 90% % or more, except for the casing, other insulation components basically do not use difficult-to-degrade epoxy resin materials, truly achieving the purpose of being green and environmentally friendly. Both circuit breakers and load switches adopt vacuum arc extinguishing, which has strong environmental adaptability, small size, space saving, no need for SF, gas detection and protection, safe and reliable operation, maintenance-free, and intelligence. It is the future development of ring main unit. direction.

CNV-12 Fully Insulated And Fully Sealed Metal Ring Network Switchgear

Introducing our revolutionary product - fully insulated and fully enclosed ring network switchgear. This high-tech miracle has been listed as a characteristic product of Zhejiang Province by the National High Voltage Electrical Testing Center type test and the Zhejiang Province High-tech Project. Its excellent performance makes it widely used in 12kV power distribution systems. It is an essential switching product for urban and rural users' power transformation and distribution systems.

DRXBW-12 Outdoor High Voltage Switch (SF6 Switch)

Adopt three-station Sf. Load switch assembly, clever separation of left and right incoming and outgoing lines, minimal structural design, strongest cable configuration function, up to 8 incoming and outgoing lines. This branch box not only retains the advantages of the fiber distribution box, but also has some of the concerns of the ring main unit. It is an ideal equipment for urban network transformation. Small size, maintenance-free, good technical economy, high reliability, simple installation and convenient use.

CNHWX-12 Prefabricated Metal Closed-loop Cage

The material performance of the primary and secondary fusion standardized ring cage box is not inferior to S304 stainless steel or GRC material (glass fiber reinforced cement) and other materials. The shell should have sufficient mechanical strength and should not be deformed or damaged during lifting, transportation and installation. The protection level of the outer box should not be lower than IP43. If the material of the ring cage is metal, the nominal thickness is ≥ 2mm, and the allowable dimensional deviation meets the Class B accuracy requirements of "GB/T 708 Dimensions, Shapes, Weights and Allowable Deviations of Cold-rolled Steel Plate and Steel Strips".

Busbar Current Transformer (Busbar CT) Insulated Plastic Casing Through-Type Current Transformer

Busbar Current Transformer (Busbar CT)80X165X57(LXK-80)

I.D. × O.D. × H

Busbar Current Transformer (Busbar CT)265x100x60(LMZP-10)

L × W × H

Busbar Current Transformer (Busbar CT)58X115X53

I.D. × O.D. × H